So it’s exciting times here and I’m pleased to tell you all that the first wave of Mag Bellum tiles has hit the store! Yippie!! It’s been a hard old slog but I’m pretty happy with the design and the potential it has for war gaming.
Lets have a look at how you buy the sets.
On the Mag Bellum page you will see the payment buttons. The designs of the tiles are displayed here and how many you get of each in the pack ( total of 5 in each ) Selling them this way allows you to select the exact tiles you want to create your board it also has the added benefit of allowing you to spread the cost. Postage is included.
How many tiles will you need to create a board?
A 2ft x 2ft board will need 4 boxes to complete it as it uses 16 tiles to create it. This leaves an extra four tiles, which you can add to the board or leave as more variety for your games if say you are playing a campaign. This size board is perfect for Inq28, AoS28, Killteam or any other skirmish game you play.
Combining sets with your friends will make for battles being fought over many different grounds and themes and up to any size you wish with whatever layout you wish. The variety of boards that can be created are endless.
Extra plate sets.
A plate is the insert which sits in the tile it was made for. These plates are what you create your terrain on like buildings, trees, mounds, piles of rusty junk, objectives and so on. You can purchase extra plates to go with the tiles you already own creating more terrain possibilities for your games without buying the whole tile set.
If you haven’t already, head over to Facebook and like the Mag Bellum page and Instagram of the same name. I will be posting updates on those platforms along with images of boards and what you can achieve with the system.
And I shall leave you with some moody shots of a board I am creating.
This project was on the back burner for a while. That was until Mr Wadu of Convert or Die said he didn’t like Genestealer Cult Limo’s. The shock of it right!? So I just had to move it up the queue and hope that my efforts will change his mind. If it doesn’t then no biggie, I love them and wished an offical one was released when they revamped the range but we got a truck instead, which is a cool kit, but not a Limo.
Any way. Without further ado here’s my Cult Limo. I do hope you like it and thoughts are always very welcome, especially on what colour it should be.
So my tile system Mag Bellum is nearly ready for release. It’s been a bit of a ride getting here and after all the hard work I have to say I’m pretty happy with the way it’s turned out. This, the first edition of the system, will be available from the beginning of next week and I’ll be hosting the first Bellum Knights day on the 2nd of December, which will be held at The Museum of Futures in Surbiton Greater London, so if you are in the area or wouldn’t mind traveling to attend then please drop me a line. At these events I hope to have a group of gamer’s attend and play the games we love like Inq28, AoS28, 40K, AoS, Kill Team, Necromunda and Morheim all on the Mag Bellum tile system as well as other boards that will be created for campaign events. The aim is to have a Bellum Knights event monthly and hopefully in the future have workshops as well.
Well that’s enough prattling on for the moment let’s get to the pictures! They are all in moody black and white as it’s at the primed stage except the trees, which were painted by Alex and have been found on many a battle field.
This edition is the Skirmish and is 2ft x 2ft. It consists of 16 tiles, 7 of which are blank with the rest having plates that insert into their tiles. The idea is that you build your scenery on these plates so that the buildings or other terrain are not sitting on the surface ( you can do that to of course ) but look as if they are built onto the board. Extra plates and tiles will be available in packs of five as well so you can expand your board and add even more variety to a setup. Each tile is 150mm x 150mm x 6mm and is magnetized by 2 magnets on each side. This allows them to click into place nicely. Now because the magnets come unfitted I needed a way of fitting them into the tiles as they are small and fiddly and my first attempt at getting them in the right way was messy and frustrating with a lot of glue sticking my fingers to everything. So I set about engineering a tool that will make this job easier and less messy.
Introducing the Mag-tool.
I will be doing an animation on how you use the Mag-tool soon but basically it allows you stick and then slide the magnet into place.
The main idea behind Mag Bellum though is that it’s designed to be a space-saving system, so after you’ve finished the battle you can just take the scenery off and stack the tiles away safely in their box. More on that next time but for now some more images of the board in a slightly different setup.
Well that’s it for this update. If you are interested then you can follow Mag Bellum on Face book and Instagram for all the latest updates plus info on up and coming events and campaigns.
Some of you may have seen this already but this time it’s with more info!
I started making this box a while ago and the one you see in this post is the prototype of a kit. The idea of cool travel boxes is awesome, with the likes of Nicolas Grillet doing some truly inspired work and it got me thinking about making a kit that you can customize to create your own box of grim dark.
In this kit you get 8 wall sections that make 4 walls, 4 lid corners with inserts and a blank plate for the middle, 4 floor sections and 2 flag stones. You also get the wooden box that comes blank and ready for whatever staining or painting you wish and a steel plate that your magnetized models will stick to.
The design of the parts are pretty blank with only a few details, this is so you can use your own bits and textures to make it original. There’s lots of space to do so, the box is 29cm x 24.5cm x 15.5cm in size. Most of the kit is 3D printed in grey plastic with the rest of the parts cast in grey resin. This will change to fully cast in resin in the near future.
So there you have it. Now it’s on to making one for an order and depending on how busy I am they can take up to three weeks to complete. I will post an image of that order before it gets sent so you can all see it in its blank, hurry up and paint me, stage 🙂 Any questions please ask and if you are interested in one for yourself please contact me via email as found on my about page. The cost of these depends on where you are in the world as the postage for one can be hefty due to its size and weight.
That’s right! I want to bring out the elements of 40K that are totally Cyberpunk. Why? Because I love Cyberpunk and with the release of Necromunda it is the perfect playground for such a thing.
First off, if you want to know more about Cyberpunk, have a read of this article on the subject. It’s well written and will give you a nice overview of the history of the sub genre and the films that were produced that shaped the style.
So recently I’ve been going back to my roots of sci-fi with the main focus on films like Akira, GiTS, Blade Runner and Johnny Mnemonic as well as artists like Simon Bisley, Kev Walker and Brom. Also the new releases on Netflix like BLAME, The Expanse and Altered Carbon have all got me thinking about applying cyberpunk themes to 40k and creating a gang of characters that are so wonderfully over the top and Cyberpunk that it hurts. Now 40K has a lot of Cyberpunk imagery already, just have a flick through Rogue Trader and you’ll see what I mean, so it is just a matter of focusing on the styles and colours that define Cyberpunk and bring them into the grim dark. As far as models are concerned the new plastic Necromunda models suit the imagery perfectly, as they should being largely inspired by what came before, but other manufacturers of miniatures will be used as well, along with my own designs that I’ll 3D print.
First up we have this lovely lady. Poison Shade. She’s bad, really bad. A pumped up, psycho poser with cannibalistic tendencies that loves blades and more blades, especially ones covered in poison. She’s quick, acrobatic and extremely strong and loves nothing more than being dominant over everyone, especially men, whom she’s been known to eat for breakfast with a nice hot mocha after killing them with her butt cheeks. Miss Shade is all scary and has made a living from being so. Hire her at your peril and desperate men beware. So ladies and gents cover your crotch as I present…………..
The main influence for this character came from the art of Simon Bisley. I’ve been a great lover of his in your face art for many years and I remember as a teenager being totally in awe of his style. His depictions of characters are wonderfully insane and so very over the top, especially his women characters. They are exaggerated to the point of being grotesque but even so you can’t help but look and you end up feeling dirty for doing so. No wonder I loved his work as a teenager 🙂 His art also possesses a vibrancy, a toxic overload of colour, which compliments his larger than life characters perfectly. That’s what I have tried to achieve with Miss Shade here. A toxic psycho you wouldn’t want to meet in a dark ally while boozed up and fiddling with your fly. You know it’s all going to end wrong.
This will be an ongoing project with no real-time limit and if any of you lovely creative readers want to get involved and poke some fun at 40K then please feel free.
With the release of Necromunda not far away I thought I’d do a model inspired by the original concept for the game known as Confrontation. In the fluff they talk about the Ash wastes, a vast landscape of shifting ash dunes and of course the people who populate this ever-changing wilderness, the ash waste nomads. Set apart from the teeming hives the ash wastes presents a scope for some truly wonderful scenery and it’s this that inspired the base. Now I’m going to try to describe how I made it so bear with. I ‘ve been playing around with a technique using resin and water. In this case I used black resin in a plastic cup, waited until it’s nearly at the end of its pot life and then blasted it with some cold water from the tap. You then wait for the resin to cure completely, pour out the water and cut away the plastic cup. Due to its unpredictable nature the results are various and some are amazing and others are a fail so there is some luck involved as to what you get. The black resin offered up the best results for ash like forms and it’s this you see as the base.
The paint job was simple and very monochromatic and I made use of pigments to enhance the effect of the base and to add ash dust to the Nomad. Overall I’m very happy with the result and I even manged to paint it in one sitting! Something that doesn’t happen that often at all.
Below you can see a picture of some other results I got from the technique I just tried to explain using grey and natural resin. As you can see the variations are extreme.