“Welcome those who seek the Ink. Let me tell you of a very fell thing. A construct that should not be and one that can only be made by mad minds. As you are well aware the sprawling libraries of Otera have been over come with chaos, the means by which this has happened is the very ink the scribes work with. Blasphemous texts have been written, and read from, unleashing untold horrors within those sacred halls, but their evil knows no bounds and a more destructive way was devised. The Daemon Wells. These works of mad genius contain vast amounts of corrupted ink, the result is that of a gateway. Chanting scribes surround each one and corrupted souls sacrifice the captured innocent until the Well bubbles or smokes and spews forth hell spawn from the realm of chaos itself.
Halls have been lost to them already, countless priceless tomes and knowledge gone. They must be destroyed! Do you, Noble Lord, have what it takes to enter this underground hell and take back what is rightfully ours. Others have passed through but none have returned. Let us hope for your sake, that they are dead and not turned. ”
Escaped Librarian Omero. The surface of Otera.
This is a Daemon Well. I designed this one and 3D printed it but they can take many forms. Through out this campaign I will be setting little challenges, to all those who want to, you can take part and create your own visions of the objects and events that take place during The Daemon Ink. So what’s your idea of an ink black spawning pool of the damned!?
Post your creations up and don’t forget to #thedaemonink or link to this page.
Greetings flesh things! Today I have something different to share. It’s a small project for Killteam or Inq28 and it’s all about this character called Keprix Cyba Mon. Keprix is a Hunter Knight of the Mechanicum and that means she is charged with the duty of hunting down and slaying the Dark Mechanicum. I always liked the idea of a noble Knight type Ad Mech character who was sworn to bring justice to those who strayed from the Omnissiah with blade and flame. The war band, so far, is very medieval in theme as I wanted that crusader image of Knights to be present and the colour palette is lighter tones, with red as the spot colour, to show their purity and belief in their cause. I think it contrasts well against the more traditional red attire you see the servants of the Mechcanicum wear.
This project has also had an influence on how I will paint my Adepta Sororitas, which is great, because I’ve been stuck on that for ages now. Below is the Censer Bearer cause every Knight needs their favourite fragrance whilst dealing out punishment.
Also to go with the group, when they are all present and done, is a custom box for them to live in. It’s a 3D designed and printed insert that is magnetised and has a section for holding the Mechcanicum Killteam Dice. Nice and cosy!
Still very w.i.p at the moment and I’m yet to decide on the symbols I will paint/transfer onto it.
Hello peeps! As the time goes by and we find that our time at home has been extended I find myself thinking of the future and what would happen if after all the furlough I won’t have a job to go back to. It’s a problem quite a few of us will face and so I’ve been using this time to get my Mag Bellum venture up and running properly. It has taken some time to be sure and I’ve had some good feed back from people so now I feel the time has come. The system works and I would love to share it with you!
The way this will start will be with Patreon. Patreon if you don’t know is site for artists and the like that you can sign up with and for a fee help them continue with their work. You get something for your money and in my case you will get 3D models to print and create your own Mag Bellum boards.
As well as Patreon I will be offering a service for those who want the product but don’t have the means to make it. This will take a bit of time to sort out though but I’m thinking along the lines of it being like a commission, so only making two or so orders at a time. So lots to do still but I’m very close to launch and I’ll be updating as I go along on Instagram and here. Well, I think that’s about it for now. Any thoughts or suggestions would be most welcome and I’ll leave you with a few shots of what will be on offer should you choose to support me on this journey.
Greetings confined ones! I do hope this post finds you deep in hobby joy as the outside world gets weirder. I for one am extremely glad to be part of this wonderful community and the sheer volume of awesome projects being produced is truly amazing. I salute you all! Keep the inspiration flowing good people and we shall get through this strange time together.
So, what have I been up to? A few things actually but today it’s all about the first model for my Sanguinala Procession. This model is the centre of it all, a huge statue of the Primarch Sanguinius being pulled along by a hulking brute while the Blood Cardinal preaches from here pulpit at the front, decaying wings of the Angel splayed out behind her.
The inspiration for this project came from reading the book Vaults of Terra, The Carrion Throne by Chris Wraight. Its an excellent read and I can highly recommend it as it has wonderful descriptions of Terra in it and he nails the feeling of the place perfectly.
Sanguinius model is a 3D print of a free file called Bloody Glorious Hawk-boy by SebTheis. It was perfect for this project, thank you.
Next up will be the dancing girls! Blood skull pom poms here we come 😉
Hello peeps! Hope you’re all well in hobby land. As for my self I must say I’ve been suffering from a lack of it 🙁 and yes it’s the same old culprit we call life and things you must do instead of wanting to do. As important as all that shit is I feel it’s just as important to give time to your interests. My wife calls it the pie of life, and she is correct, one slice should never get too big. So here I am reslicing my pie to much more balanced and enjoyable portions.
As some of you are aware I have been developing a tile system called Mag Bellum. Its magnetic and solid! It’s also been a hard slog, due to pie issues, and I feel I am now ready to give some much needed attention to it. So let’s jump in shall we 🙂
First up you have this selection of tiles.
This bunch is enough to create a 2 x 2 skirmish sized board.
Nice! But wait. You can do so much more.
What about walls? Yep they will be available to and look like this.
As you can see they come as a basic sci- fi design but you will be able to change that by sliding various inserts into place. This one is the Library insert. Door ways and smaller wall sections have also been designed.
All this is in preparation for Salute 2020. I plan to have it in the shop soon and will be documenting my road to Salute so you will see my progress on the designs and what will be available on the day, I’m going to have some terrain pieces to buy and a couple of complete special edition sets.
I will now leave you with some tasty shots of some of the kits you can expect to purchase in the very near future. Cheers! 🙂
Hello peeps! Just a little post today on a little project I have just finished. It’s a dice box! This little thing was inspired by the box itself. I found a card game while I was sorting through stuff and it was in a rather nice tin box with a spring mechanism on the lid. Very cool I thought! Shit game I thought! Perfect box for dice it is!
The insert was designed in CAD and then 3D printed in grey PLA. The whole lot was then primed a few times in grey primer. I made sure the dice fit nicely into it and are loose enough with plenty of space around them so you can get them out easily. So far so good!
THEN THINGS GOT GRIM!!!
I decided to have a go at some weathering techniques using masking fluid and scratching and above is the outcome. A Grim Mech Dice Box! Quite a fun little project and it’s spawned yet another project to add to the list. A Mechanicum based Kill team. More on that to come!
Greetings fellow hobby nuts! I have decided that it is high time I started an ][nq28 style narrative game again. Yes that’s right the massive undertaking and creative slaughter that ensues is just another aspect of this wonderful hobby that I love, plus having some creative people share in your vision is priceless.
So what will this one be about? Well it will be set on Terra at the time of the Festival of Sanguinala and will involve gangs of kids and young adults defending themselves against the predators that lurk in the under hives. Think Stranger Things and the Goonies but in grim dark 40K. That’s the basic gist of it but of course more in depth musings and character write ups will follow in due time. First though I’d like to share the beginnings of the Sanguinala Procession with you.
These two characters are yet to be named and I have yet to decide if they’ll be friend or foe.
The mighty statue of Sanguinus is a 3D print from SebTheis on Thingyverse with a few GW bits to finish him off.
So it’s been a while. Way too long really but that’s the vacuum of Instagram for you. I’ve been posting on there for a while and while it’s good and quick it’s eye candy and lacks a certain depth. So I’m aiming to give my blog more love that it deserves and will start with my Slaanesh project.
The first installment has to be my Daemon Engine for the group. It’s a colossal monster of metal tentacles and writhing, tortured flesh and like aspects of the rest of this project I’ve used kitbashing, sculpting and 3D printing to create it. I documented it step by step as well so you can see the process of creating it and to date I think it’s my most complex undertaking.
So sit back and enjoy and I’ll be back again very soon 🙂
And finally all painted up using mainly contrast and washes.
I’ve been working very hard to get everything ready for Salute this coming Saturday and I think I’m winning 🙂
So to celebrate that small fact here’s a promotional animation for Mag Bellum, which was created by my company Black Edge 3D. This vid can be seen on every social media platform I’m on, with more animations to follow in the near future as we start to expand the range. Very exciting times!!
Hi all! Just a quick one today. I’ve slapped some paint on my cult Limo and started to paint my Patriarch who will be riding in the back ready to pounce on some poor unfortunates. It’s a quick paint job as cool limo’s are always black and shiny and not much else. 🙂
I’ll be taking a 3D printed kit of this model to Salute this year so if you’re there come and say hi and take a look. Loads of other bits and pieces will be on show too. Cheers!